Shenzhen Heguang Lighting Co., Ltd. is well-known as one of the most reliable manufacturers and suppliers of wall mounted led lights in China. If you're going to wholesale high quality wall mounted led lights made in China, welcome to get free sample from our factory. We also accept customized orders.
Product Overview
This wall-mounted LED Wall Mounted Led Lights is designed specifically for concrete pools. It features an engineering-grade ABS housing with a UV-resistant polycarbonate (PC) faceplate and a 316L stainless steel baseplate, combining aesthetic appeal with durability. Built to strict IP68 structural waterproofing standards and equipped with constant-current driving and comprehensive circuit protection, it offers a safe, stable, and long-lasting underwater lighting solution for your pool.
Key Features
1. Professional Waterproofing · IP68 Structural Design
It uses structural waterproofing engineering, as opposed to potting. The use of precision molding technology with silicone sealing rings ensures an IP68 level of protection and makes the product operable at a depth of up to 3 meters. Structural waterproofing is more reliable than potting and, as a result, there are no potential problems related to the ageing and cracking of adhesives or the inclusion of air bubbles within the adhesive, yielding a longer service life for each unit.
2. The Baseplate is made of Stainless steel 316L to help with heat and corrosion.
The baseplate material uses 316L stainless steel because it resists chlorine and saltwater corrosion more effectively than 304 stainless steel. It also acts as a heat sink to dissipate the heat produced by the LED dies, thus reducing the degradation of the LED chip over time and preventing lumen depreciation.
3. Brightness LED chips and Pure Light Quality
This feature is equipped with large 38 mil LED chips and produces high power per unit and higher brightness per unit. The device is equipped with a total of 18 high-brightness LEDs. 6 LEDs are independently designed for pure colors and stable output for the red, green, and blue colors.
| Color | Chip Specification | Quantity | Wavelength |
| Red | 38mil | 6 pcs | 620-630nm |
| Green | 38mil | 6 pcs | 515-525nm |
| Blue | 38mil | 6 pcs | 515-525nm |
Chip size is measured in "mils" (thousandths of an inch); 38mil is approximately 0.97mm, classifying it as a medium-to-high-power LED chip.
4. Constant current driver with dual protection
The built-in constant current driver maintains a constant current to the LED modules and therefore prevents any lumen depreciation or damaging effects of overcurrent. This includes two different types of protection, which are as follows:
Open circuit shut-off: when the load is removed, the output to the LEDs will be cut off.
Shutdown in case of a short circuit: when there is an abnormal short circuit to the
5. VDE-Standard Rubber Cable · Safe & Durable
Comes standard with a 2-meter VDE-compliant rubber cable. It offers excellent flexibility, resistance to temperature extremes, and aging resistance, making it ideal for long-term underwater use. VDE certification is a safety certification for electrical products issued by the Association for Electrical, Electronic & Information Technologies (VDE) in Germany; it carries significant prestige and enjoys widespread recognition in the international market.
6. Engineering-grade ABS housing + UV-resistant PC faceplate
ABS engineering plastic: High strength, impact resistance, and dimensional stability
PC (polycarbonate) faceplate: High light transmission, UV-aging resistance; resists yellowing and cracking during long-term use
Wall Mounted Led Lights Specification
|
Model |
HG-PL-18X1W-C2-RGB-K |
|||
|
Electrical |
Voltage |
AC12V |
||
|
Current |
2250ma |
|||
|
HZ |
50/60HZ |
|||
|
Wattage |
18W±10％ |
|||
|
Optical |
LED chip |
38mil Red LED Chip |
38mil Green LED Chip |
38mil Blue LED Chip |
|
LED QTY |
6PCS |
6PCS |
6PCS |
|
|
Wave length |
620-630nm |
515-525nm |
460-470nm |
|
|
Lumen |
630LM±10％ |
|||
Installation Instructions
Suitable pool types
This product is designed specifically for concrete pools and is suitable for both new pool construction and the renovation of existing pools.
Installation steps (summary)
Power disconnection: Ensure the pool's power supply is cut off before installation
Positioning and drilling: Determine the installation location on the pool wall (recommended depth: 45–60 cm underwater) and drill holes matching the base plate's mounting points
Securing the base plate: Fasten the 316L stainless steel base plate to the pool wall using the provided stainless steel expansion bolts
Connecting the cable: Connect the 2-meter rubber cable to the waterproof junction box, ensuring a sealed connection
Installing the light unit: Attach the light unit to the base plate and verify that the sealing ring is properly seated
Power-on test: Restore power and test the light's operation
Waterproofing check: After testing, allow the unit to sit and observe the seal for any signs of water leakage
Precautions
Installation must be performed by a certified electrician in accordance with local electrical codes
Do not damage the pool wall's waterproofing layer during installation
It is recommended to conduct a 24-hour seal test after installation before filling the pool for use
Quality Assurance
| Item | Description |
| Waterproof rating | IP68 structural waterproofing (non-potted/no resin filling) |
| Material certification | VDE-standard rubber cable, 316L stainless steel |
| Driver protection | Constant current + open-circuit/short-circuit protection |
| UV resistance | PC faceplate resistant to yellowing and cracking |
| Suitable environments | Concrete pools, freshwater/saltwater pools |
| Warranty period | 2 years |
FAQ
Q: Is it the right light for vinyl-lined pools?
A: No. That product was created for concrete swimming pools. When it comes to vinyl swimming pools, we normally suggest that you buy a specific surface mount unit because the installation will not harm the liner.
Q: The cable included in the kit is 2 meters long. What do I do if that's not long enough?
There is a 2-meter length of cable furnished with the standard configuration. In circumstances where the installation position is far from the cable junction box, a longer length of cable can be incorporated using a water-tight junction box. You may also place an order with us for the inclusion of a longer cable.
This unit will perform satisfactorily in saltwater pools. The base plate has been manufactured from 316L stainless steel that will out-resist corrosion from saltwater better than stainless steel that has been manufactured from 304 grade. The 316L stainless steel allows for the use of this unit to be used in a saltwater pool or in an environment with high chlorine content.
What makes structural waterproofing (IP68) and resin-potted waterproofing different?
Structural waterproofing uses accurate molding and seals to stop water from getting in; there is no filler in the seals. Resin-potted waterproofing means that you pour plastic into the inside of the lamp housing to keep the water from getting out. Structural waterproofing eliminates many of the problems found with ageing plastics and trapped air bubbles or cracks that may appear in resin. Therefore, both structural waterproofing methods are much more reliable and last longer.