Rgbw Pool Light

Shenzhen Heguang Lighting Co., Ltd. is well-known as one of the most reliable manufacturers and suppliers of rgbw pool light in China. If you're going to wholesale high quality rgbw pool light made in China, welcome to get free sample from our factory. We also accept customized orders.

Product Overview：

TheHG-PL-18W-V-RGBW-T is a kind of RGBW LED Pool Light that has been designed to fit the needs of a vinyl-lined pool. It is designed to have two-wire synchronous control technology to control all the RGBW colour changes at the same time across multiple lights by simply connecting to the power cable. European and North American regions are the main consumers, and it has certifications such as CE, RoHS, FCC, and ISO 9001.

rgbw pool light Parameters:

Key Features：

The RGBW lights for the pool work with a complex wiring system, and when you want to upgrade the older ones, it is also very expensive due to the multiple wires. These new lights only use a two-wire control technology, so you can achieve the same result as the old ones, only with the two wires that supply the power. This product enables you to achieve one hundred percent color-change synchronicity amongst all your pool lights, without any separate signal cable needed.

Use cases:

* Upgrade your current vinyl liner pool lights without needing to re-wire.
* Reduce the cost of materials and labor associated with the construction of a new pool.
* Achieve synchronized control over several pool lights that are part of a network. Product Overview

1. Unique Vinyl-Liner Friendly Construction
The Unique nature and delicate surface of vinyl liners require careful light installation that does not damage or cause leaks to the liner itself. The surface-mounted design of this lighting product, which mounts right onto your vinyl pool liner, has a unique flange bracket and gasket design that mounts directly onto the liner without needing any cutting of larger holes in the vinyl. This helps maintain the structural integrity of the vinyl liner.

2. IP68 Water Resistant Construction ( no potting)
Using the structural waterproofing method, the precision molding together with silicone sealing rings results in an IP68 rating, which enables the equipment to work submerged up to three meters of water. Unlike potted processes, the structural waterproofing method has no aging or cracking of adhesives and no air bubbles, thus increasing the reliability and service life of the equipment.

3. The VDE Standard rubber cable.
The standard unit is a two-meter rubber VDE-certified cable; it is both flexible and temperature-resilient as well as aging-resistant, and can be used underwater long-term. The Association for Electrical, Electronic & Information Technologies (Germany) has established the VDE certification as a very important safety certification for equipment utilizing electrical components that are widely recognized on global marketplaces.

4. Built Quality and Physical Attributes
Engineering-grade ABS housing provides an extremely rigid frame; it is highly resistant to compression and deformation and maintains its shape.
Anti-UV Polycarbonate (PC) Cover: The PC cover will have very High light transmittance and will NOT turn yellow or crack over a Long Period of time.

Application Scenarios:

How to Set up Your Pool light?
Shut Off the Power – You have to make sure that all the electricity that runs to your swimming pool is totally shut down first.
Choosing a Position – The best place to mount your pool light is usually about 45-60 cm below the surface of the water.
Fasten the Bracket – The kit has screws made of genuine stainless steel that you will use to attach the flange to the pool liner. Make sure you install the sealing gasket before screwing it in.
Put the Light in the Bracket – Once the flange bracket has been secured and the sealing ring has been installed correctly, the light body can simply be snapped onto the flange bracket.
Connect the Wires – Follow the diagram to connect the power wires. This pool light uses a two-wire power system.
Test Turn On: Turn on the electricity and check if the light colors are syncing well.

Quality Control:
Product Specification:
Water Resistance: IP68 water-resistant (unpotted)
Cable should comply with VDE regulations. The cover must be UV resistant.
Constant current driver with over current/open circuit protection.
CE, RoHS, FCC, ISO 9001 certified.
TÜV Rheinland certified.
Rate of defective units: Less than 0.3%.

A= The lights that are manufactured by us are specifically designed for vinyl pools. If you would like to use them with a concrete pool, we would highly recommend either our recessed or wall-mounted lights that have been designed for the specific application.

A= The 2-wire sync control uses signal modulation along the AC power line; this means there is no theoretical limitation on the number of lights that can be linked together into one group; however, it is generally advised to limit group size to 10 lights for best synchronisation results, and for more information on this, please contact our support team.
Q: Can this Product be used in saltwater swimming pools?

Yes, it passed all necessary corrosion resistance tests and works perfectly with both freshwater and traditional chlorine-based swimming pools. For use with saltwater swimming pools, we recommend using the model equipped with 316L stainless steel screws.

Q: Is it necessary to empty the swimming pool before fixing?

No, the product possesses a surface-mount design. You only have to lower your pool level just below where it needs to be installed. It is not necessary to empty the entire swimming pool.