Shenzhen Heguang Lighting Co., Ltd. is well-known as one of the most reliable manufacturers and suppliers of vinyl lined pool light in China. If you're going to wholesale high quality vinyl lined pool light made in China, welcome to get free sample from our factory. We also accept customized orders.
Vinyl Lined Pool Lights from the HG-PL-18W-V4 Series from Wako Lighting Benefits:
1)18W high efficiency LED,1800lumens
2)Integrated waterproof technology, defective rate ≤0.1%
3)Applied to a vinyl liner swimming pool
Heguang Lighting HG-PL-18W-V4 Series Vinyl Lined Pool Light Parameters:
|
Model |
HG-PL-18W-V4 |
HG-PL-18W-V4-WW |
|||
|
Electrical
|
Voltage |
AC12V |
DC12V |
AC12V |
DC12V |
|
Current |
2200ma |
1500ma |
2200ma |
1500ma |
|
|
Frequency |
50/60Hz |
/ |
50/60Hz |
/ |
|
|
Wattage |
18W±10% |
18W±10% |
|||
|
Optical
|
LED chip |
SMD2835LED |
SMD2835LED |
||
|
LED(PCS) |
198PCS |
198PCS |
|||
|
CCT |
6500K±10% |
3000K±10% |
|||
Vinyl liner pool wall-mounted installation process:
Step 1: Positioning mark
Determine the installation height of the vinyl liner pool light
Step 2: Pad the hole
Use a special vinyl cutter to make a hole (the hole size is about 2mm smaller than the lamp body), apply a tear-resistant coating (such as PVC glue) on the edge of the cut, and then install an EPDM sealing ring on both sides
Step 3: Fix the bracket
Insert the bracket from the outside of the pool wall, add a silicone gasket between the bolt head and the liner, and then tighten it with a torque wrench
Step 4: Light body installation
Pass the cable through the bracket, reserve 15cm, and then rotate the lamp body 90° clockwise when it is inserted into the bracket. Locking
Step 5: Waterproofing
Wrap tape around the cable entrance and inject silicone sealant at the joints
Product selection:
Choose a model designed for vinyl (such as the Hayward ColorLogic Vinyl Liner series)
Power recommendations:
Small pools (<30㎡): 15-20W
Medium pools (30-60㎡): 30-50W
Large pools (>60㎡): multi-lamp distributed installation