Suggestions on the selection of swimming pool lights
First of all, the number and color of lights should be selected according to the size of the swimming pool. If it is too large, it will completely cover the swimming pool. If it is too small, it will not achieve the desired effect.
Secondly, choose different colors of swimming pool lights according to the shape of the swimming pool. Generally, swimming pool lights are rectangular. Rectangular swimming pool lights are more suitable for white light and RGB color swimming pool lights. It is suitable for swimming pool lights with RGB colors, because the angle of illumination of swimming pool lights will change, so choosing RGB swimming pool lights will be more suitable.
So using white LED lights has two advantages: higher LED light efficiency and lower absorption rate in water.
For swimming pools of different widths and shapes, the approximate guiding values of the luminous flux required by LED lamps are as follows:
The wires used must be special underwater wires that can match the diameter of the copper core specified by the lighting manufacturer. If the light fixture does not have wires (for more flexibility in wire lengths), make sure to follow the manufacturer's recommendations for sealing the connections. The same requirements apply to distribution boxes and watertight distribution systems.
The most ideal situation is that the connection between the wire and the lamp is completed at the lamp factory, which requires determining the length of the wire when placing an order for the lamp. For the values listed above, if you want the lighting effect in the water to be more obvious, it is recommended that the swimming pool
The illumination of the environment is kept below 100lx. For rectangular swimming pools, if you want more uniform illumination, the lamps and lanterns are recommended
It is recommended to install on both sides of the long side, with a 90-degree beam angle, and the spacing between the lamps is about half of the width of the swimming pool.
